| Detailed Product Description： | Biaxial mixer by the manufacturer to the user, subject to storage halfway stage, when the product reaches the use of plants to deal with parts of careful examination, to conduct a test run after installation, inspection departments bolts and other fasteners are loose, which do not normal, then feeding operation should be the first stop after work interruptions material down to avoid overloading when starting load is too large. Biaxial mixer debugging directly affect the performance of the material of the ball into the ball, which is specially designed atomizer supporting the use of the nebulizer mixer installation is based on quantity of different angles, to ensure water does not cause atomization Drenching phenomena under the premise really play the role of pre-wet stirring, stirring blade angle changing area between 12 ° -21 °. Blender is a biaxial gear, and when working in normal operation, each class in need of a clean up, to play each note grease the bearings, when running two months, should be cleared within the gearbox oil change once biaxial mixer prices, after every six months for a. Maintenance carefully inspected once per shift gear, gear box oil biaxial mixer, reach the liquid level, the need to add a little oil. Try the new machine a month, need to change oil, and remove the dirt inside. After replacing every quarter. Always check the bolts fastening the parts, if necessary tighten loose. Always check the degree of slack V-belt drive, whether there is slippage, if any should be tightening or replacement. Wear regular inspection of the blade, if found badly worn and should be replaced. According to drain gray, timely pinch or replacement packing and seals. take down, you should stop feeding Qingdao biaxial mixer in advance, after the shutdown, the eradication of plot material layer inside the machine, shut down for a long time, be sure to remove the machine induration of the material layer, not in the machine has accumulated material the case of the boot, so as not to burn out the motor or the stirring blade was stuck accidents caused by equipment main technical parameters: Model SJ-10 SJ-20 SJ-40 SJ-60 SJ-100 SJ-200 treatment of dry ash (t / h) 10,204,060,100,200 Motor Power (kW) 4 5.5 7.5 11 22 30 water pressure (MPa) 0.4 ~ 0.6 0.4 ~ 0.6 0.4 ~ 0.6 0.4 ~ 0.6 0.4 ~ 0.6 0.4 ~ 0.6 Water consumption (t / h) 2.5 5 10,152,550 blade diameter (mm) 430 430 630 630 700 860 Qingdao biaxial biaxial mixer mixer _ _ Qingdao Xudong electrical equipment supplied by Power Equipment Co., Ltd. Qingdao Xudong. Power Equipment Co., Ltd. Qingdao Xudong (www.qdxudong.com) (www.qdxudong.com) strong, credible, Shandong Qingdao industry-specific equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Qingdao Xudong electrical equipment and you hand into the brilliant, for a better future! You can also access (www.qdxudong.com/supply_details_40790605.html), for more information about the company. |
| No.13634783
