Installation 1. Before installation, you must first biaxial mixer during transit or unloading boxes mixed with clay, soil contamination, be cleaned before installation to proceed. 2. Biaxial mixer base should be completed in 20 days before watering biaxial mixer formally installed base should be solid and reliable, is not guaranteed because of the foundation bearing force is too small and occur biaxial mixer sink and additional deformation, ensuring biaxial mixer operation have sufficient stability. Biaxial mixer after all the adjustments required to secure, then tighten the bolt shaft mixer was using two synchronous rotational symmetry axis of the spiral-shaped, while the transportation of dry ash and other powder materials biaxial mixer mixing with water, to make humidification do not take the dry ash materials without oozing droplets purpose, which can be mixed with fly ash aggregate, calcium carbide mixed, gypsum, sand and gravel, slag, etc. Shanghai. It is mainly used for supporting a host of various standard bricks, sand-lime brick, coal and other production lines. Is one of the important equipment autoclaved powder, fly ash bricks, sand-lime brick, coal production and the process. Commissioning 1. Small biaxial mixer should be carried out after the biaxial mixer fitted properly lubricated parts, and check whether there is enough at each oil fuel, such as not enough high-quality dual-axis mixer should add a little before you can no load test. 2. In the no-load test before special attention should check the correctness of electrical wiring, and whether there are tools trough body left over parts. 3. When you first start the application with the open with stop solution for several experimental observation, each part of the action, that the right good, the party was officially running. Small biaxial mixer, Qingdao Xudong electrical equipment (certified), biaxial mixer provided by Qingdao Power Equipment Co., Ltd. Xudong. Power Equipment Co., Ltd. Qingdao Xudong (www.qdxudong.com) (www.qdxudong.com) is a leader in Qingdao, Shandong Province, industry-specific equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, the maximum to meet customer needs. Power Equipment in Qingdao Xudong leadership with the staff warmly welcome all inquiries negotiations to create electrical equipment Qingdao Xudong a better future.